---
title: What is RF and microwave calibration?
description: RF and microwave calibration is the process of checking radio frequency test equipment, such as signal generators, spectrum analysers, network analysers and power meters, against reference standards traceable to national standards.
image: https://blog.dmsystemsgroup.co.uk/hubfs/RF%20calibration.jpg
---

<https://www.dmsystemsgroup.co.uk>

- About us
  
  ![DM-Master\_Blue-Black](https://blog.dmsystemsgroup.co.uk/hs-fs/hubfs/DM-Master_Blue-Black.webp?width=256&height=183&name=DM-Master_Blue-Black.webp)
  
  We’re a customer-led organisation that’s supported by the world’s leading experts in both defence and commercial sectors.

  [See what we do](https://www.dmsystemsgroup.co.uk/about/)

  About us
  
  [About us](https://www.dmsystemsgroup.co.uk/about/) [Careers](https://www.dmsystemsgroup.co.uk/about/careers/) [Sustainability](https://www.dmsystemsgroup.co.uk/about/sustainability/) [Certifications](https://www.dmsystemsgroup.co.uk/about/accreditations/)
- Calibration
  
  ![DM\_Calibration\_Blue-Black](https://blog.dmsystemsgroup.co.uk/hs-fs/hubfs/DM_Calibration_Blue-Black.webp?width=256&height=128&name=DM_Calibration_Blue-Black.webp)
  
  Fully-managed calibration services, delivered on-site and at our UKAS laboratories, to build confidence in your test results.

  [See our capabilities](https://www.dmsystemsgroup.co.uk/calibration/)

  Calibration
  
  [Electrical Test Equipment](https://www.dmsystemsgroup.co.uk/calibration/electrical/) [Mechanical & Dimensional](https://www.dmsystemsgroup.co.uk/calibration/mechanical/) [On-site & Mobile](https://www.dmsystemsgroup.co.uk/calibration/on-site/) [UKAS Calibration Services](https://www.dmsystemsgroup.co.uk/calibration/ukas/) [Managed Calibration & Services](https://www.dmsystemsgroup.co.uk/calibration/managed-services/) [Calibration](https://www.dmsystemsgroup.co.uk/calibration/)
- [Defence](https://www.dmsystemsgroup.co.uk/defence/)
- Products
  
  ![DM\_Products\_Blue-Black](https://blog.dmsystemsgroup.co.uk/hs-fs/hubfs/DM_Products_Blue-Black.webp?width=256&height=128&name=DM_Products_Blue-Black.webp)
  
  DM partners with select organisations to provide the best products, support and opportunities to help our customers’ designs thrive.

  [View our range](https://www.dmsystemsgroup.co.uk/products/)

  DM Products
  
  [Products](https://www.dmsystemsgroup.co.uk/products/) [fieldSENSE Buy online](https://fieldsense.dplusm.co.uk/)
- [Resources](https://blog.dmsystemsgroup.co.uk)
- [Contact](https://www.dmsystemsgroup.co.uk/contact-us/)

# What is RF and microwave calibration?

RF and microwave calibration is the process of checking radio frequency test equipment, such as signal generators, spectrum analysers, network analysers and power meters, against reference standards traceable to national standards. It confirms that an instrument measures or generates power, frequency, impedance and attenuation accurately across its full operating range, which can extend from a few kilohertz to tens of gigahertz. For engineers in defence, aerospace and electronics manufacturing, RF calibration is what makes high-frequency test results trustworthy, repeatable and defensible during a quality audit.

## What does RF and microwave calibration involve?

RF and microwave calibration compares an instrument's readings or outputs with reference standards at multiple frequency and level points, and records any deviation on a traceable calibration certificate.

Radio frequency (RF) broadly covers signals from kilohertz up to hundreds of gigahertz, with "microwave" typically describing the upper part of that range, from around 1 GHz upwards. Because instruments behave differently at different frequencies, a single check is not enough: calibration must test performance at points spread across the range the equipment is actually used in. Where an instrument is out of tolerance, it can be adjusted and re-tested, with "as found" and "as left" results recorded so that any impact on previous measurements can be assessed.

## How does RF calibration differ from standard electrical calibration?

RF calibration differs from DC and low-frequency electrical calibration because, at high frequencies, cables, connectors and impedance mismatches become part of the measurement itself.

| **Factor** | **Low-frequency electrical calibration** | **RF and microwave calibration** |
| --- | --- | --- |
| Typical frequency range | DC to kHz | kHz to tens of GHz |
| Key quantities | Voltage, current, resistance, capacitance | Power, frequency, impedance (S-parameters), attenuation, phase noise |
| Impedance | Usually high-impedance measurement | Matched 50 Ω (or 75 Ω) systems; mismatch causes reflections and error |
| Connectors and cables | Minor influence | Significant: wear, torque and cable flexing all affect results |
| Units of power | Volts and amps | dBm, from nanowatts to watts |

A worn SMA connector, an under-torqued joint or a poorly matched adapter can introduce errors larger than the instrument's own specification. This is why RF calibration requires specialist reference equipment, controlled laboratory conditions and technicians experienced in high-frequency measurement.

## Which instruments need RF and microwave calibration?

Any instrument used to generate, measure or analyse RF signals for product acceptance, compliance or safety decisions should be included in your calibration programme. Common examples include:

- Signal generators, checked for frequency accuracy, output level accuracy and spectral purity
- Spectrum analysers, checked for frequency accuracy, reference level accuracy, frequency response and noise floor
- Vector network analysers (VNAs), along with their calibration kits
- RF power meters and power sensors
- Attenuators, frequency counters and other RF components used as references.

## Is a VNA user calibration the same as RF calibration?

No. A VNA user calibration corrects for the cables and fixtures in a specific measurement setup, while periodic RF calibration verifies that the analyser itself still meets its published specifications.

As [Copper Mountain Technologies explains](https://coppermountaintech.com/calibration-types-and-considerations/), user (measurement) calibration using short, open, load and thru standards is often done daily, whereas the performance test that verifies the instrument is typically carried out annually. Both are needed, and the calibration kits used for user calibration also require periodic, traceable calibration of their own.

## How is RF calibration traceable to national standards?

In the UK, RF calibration is traceable through an unbroken chain of comparisons back to the National Physical Laboratory (NPL), the UK's national measurement institute.

NPL's [RF and microwave traceability](https://www.npl.co.uk/research/electromagnetics/electromagnetic-traceability) is centred on the range from 1 MHz to 110 GHz, while its [micro-calorimeter power standards](https://www.npl.co.uk/products-services/radiofrequency/power-standards) measure RF power from 10 kHz to 170 GHz, traceable to DC quantities realised by its Josephson voltage and quantum Hall resistance standards. ISO/IEC 17025-accredited laboratories calibrate their reference standards against this chain and, in turn, calibrate customer equipment, stating the [measurement uncertainty](https://blog.dmsystemsgroup.co.uk/understanding-calibration-uncertainty-a-guide-for-quality-managers) at every step.

## How often should RF test equipment be calibrated?

Most RF test equipment is calibrated annually as a starting point, with the interval then adjusted based on manufacturer recommendations, frequency of use, operating environment and calibration history.

[Keysight notes](https://www.keysight.com/zz/en/assets/7018-03664/application-notes/5991-1220.pdf) that the right interval "reduces the risks that come with inaccurate measurements and erroneous pass/fail decisions." Equipment used in harsh field conditions, moved frequently or relied on for critical acceptance tests may need shorter intervals. Our guide to [building a calibration schedule](https://blog.dmsystemsgroup.co.uk/how-to-build-a-calibration-schedule-for-your-test-equipment) explains how to set and review intervals.

## Which industries rely on RF calibration?

RF calibration is essential wherever high-frequency performance affects safety, compliance or contractual acceptance. This includes defence (radar, secure communications and electronic warfare systems), aerospace (avionics and satellite communications, often under AS9100), telecommunications and electronics manufacturing, where RF test equipment underpins production testing and EMC pre-compliance work. In defence supply chains, calibration traceability is frequently a contractual requirement, which we will explore in the next article in this series.

## RF and microwave calibration with DM

DM Calibration is UKAS Calibration Laboratory No. 0143, accredited to ISO/IEC 17025:2017, and a Specialist Service Provider to the UK Ministry of Defence. Our [dedicated electrical calibration laboratory](https://www.dmsystemsgroup.co.uk/calibration/electrical/) services cover the entire RF and microwave frequency range and all major RF, electrical and microwave test parameters, with [UKAS-accredited](https://www.dmsystemsgroup.co.uk/calibration/ukas/) and traceable certificates and [fully managed calibration](https://www.dmsystemsgroup.co.uk/calibration/managed-services/) available to keep your RF test equipment accurate, compliant and audit-ready. To find out more about our services and how to ensure your equipment is audit ready, download our guide below. 

[![Free download   The Calibration Audit Readiness Pack   Download our guide to calibration audit confidence to learn more.](https://no-cache.hubspot.com/cta/default/8834937/interactive-220430204750.png)](https://blog.dmsystemsgroup.co.uk/hs/cta/wi/redirect?encryptedPayload=AVxigLL1STVg959pOOCkYV2fHw8ZR0a5CtRIsLTZJY5s0Z265eHgh63kfjosCYc9DX4V4SEjrCug7%2FMqxHyfSL2laq88O2uT2GPyjtHA%2F51ZAeYG3S88WXgEf%2B4ubA9lvoG1OqAsbOHgvlCPfyDfrLq6Z9C6K2Gz1SAs5arLUrk9ObfKHetMn83QHgwQ0AymHgRkNb582zZjaXv%2BJM%2FYg9M2iOrA3ppWSFITe5Hq7ZhepZNu%2F3%2BMcTLywcs%3D&webInteractiveContentId=220430204750&portalId=8834937)

### Book your calibration now

Our experts are on-hand to handle all of your calibration needs.

[Get a quote](https://www.dmsystemsgroup.co.uk/contact-us/)

 About DM

- [About us](https://www.dmsystemsgroup.co.uk/about)
- [Sustainability](https://www.dmsystemsgroup.co.uk/about/sustainability)
- [Careers](https://www.dmsystemsgroup.co.uk/about/careers)
- [Contact us](https://www.dmsystemsgroup.co.uk/contact-us)

 Login

- [AQA login](http://aqad.dplusm.co.uk/customer/home/login)
- [Calmet login](https://data.calmet.co.uk/data/)
- [View all](https://www.dmsystemsgroup.co.uk/calibration-customer-portals)

 Social

- [Linkedin](https://www.linkedin.com/company/d-m-systems-and-tests/)

[01462 650620](tel:01462%20650620)

![UKAS Calibration 0143](https://blog.dmsystemsgroup.co.uk/hubfs/UKAS-CALIBRATION-0143.webp) 

[Download our certificates](https://www.dmsystemsgroup.co.uk/about/accreditations/)

© DM Systems Group Ltd 2023

[Terms & Conditions](https://www.dmsystemsgroup.co.uk/terms-conditions/) [Privacy Policy](https://www.dmsystemsgroup.co.uk/privacy-policy/) [Cookies](https://www.dmsystemsgroup.co.uk/privacy-policy/) 

 Website by [Forge®](https://www.forge.uk)

```json
{
  "@context" : "https://schema.org",
  "@type" : "BlogPosting",
  "author" : {
    "@type" : "Person",
    "name" : "DM",
    "url" : "https://blog.dmsystemsgroup.co.uk/author/dm-1"
  },
  "dateModified" : "2026-11-17T10:11:39.187Z",
  "datePublished" : "2026-11-12T00:00:00.000Z",
  "headline" : "What is RF and microwave calibration?",
  "image" : [ "https://blog.dmsystemsgroup.co.uk/hubfs/RF%20calibration.jpg" ],
  "mainEntityOfPage" : {
    "@id" : "https://blog.dmsystemsgroup.co.uk/what-is-rf-and-microwave-calibration",
    "@type" : "WebPage"
  },
  "publisher" : {
    "@type" : "Organization",
    "logo" : {
      "@type" : "ImageObject"
    },
    "name" : "DM Systems Group"
  }
}
```